Features

• This superior quality, durable hose meets NFPA 1961 standards
• Jacket Construction: The jackets will be woven evenly and be free of defects, including knots, lumps, or unsightly disfigurations that could jeopardize the integrity of the hose assembly. The warp yarn shall consist of filament polyester yarn. The filler yarns shall be constructed of high strength, low elongation, filament polyester to reduce weight and increase flexibility.
• Lining: The polyurethane lining shall be a single-ply extruded tube of synthetic high tensile TPU compounded to resist ozone. The finished form shall be free of pits or other imperfections and have a smooth finish for better flow characteristics. The tube thickness shall be a minimum of 0.12". Minimum tensile strength requirements for the finished tube requirement shall be 34 MPa. A valid USA/ULC Underwriters inspection procedure shall be in force
• Performance: The service test pressure of hose made to this Specification shall be 300 psi/2068 kPa. The proof test ressure shall be 600 psi/4137 kPa, and the burst test pressure of a 1 m. sample shall be at least 900 psi/6205 kPa. The hose must resist kinking and be flexible at temperatures as low as -54°.
• Standards: Fire hose manufactured to this Specification shall meet and exceed all performance requirements of Federal Specification NSN# 4210-01-167-1061
• Couplings: Brass GHT threaded couplings complete with gasket

• *Key